0.96 Inch I2C/IIC 4pin OLED Display Module (Yellow + Blue) Without Soldered Pin
This 0.96 Inch I2C/IIC 4pin OLED Display Module (YELLOW+BLUE) can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel display.
OLED monochrome 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
Interface pin for 4 PIN 128×64 OLED-
- GND: Ground
- VCC: 3.3 volts – 5 Volts
- SCL: Serial Clock
- SDA: Serial Data
Features of 4 pin 128 x 64 OLED Display-
- Super High Brightness (Adjustable)
- Super High Contrast (Adjustable)
- Embedded Driver/Controller
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- working voltage: 3.3V
- Control Chip: SSD1306
Package Includes
- 1 x 0.96 Inch I2C IIC 4pin OLED Display Module
Reviews
There are no reviews yet.